LOCK IN YOUR GRIP

Install your grip correctly for maximum hold, control and durability.

  • 1. CLEAN IT

    Degrease the frame thoroughly with brake cleaner and a clean, cloth. Dirt or grease will weaken the bond.

  • 2. HEAT IT

    FRAME GRIP ONLY: Warm the frame with a heat gun or hair dryer. Do not use heat when installing Clear Number Plate Grip.

  • 3. WARM THE GRIPTAPE

    Gently heat the frame grip to soften the glue and activate the adhesive.

  • 3. STICK IT

    Line it up carefully, apply it to the frame and press down hard. Work from the centre towards the edges.

  • 3. LOCK IT

    Heat the grip again slightly and press every section firmly into place. Give the edges and corners extra attention.

  • LET IT BOND

    For maximum hold, leave it for 24 hours before riding or washing the bike.

BUILT TO PERFORM. MADE TO GRIP.